RipCurl
Rip Curl Men Elasto CZ Hooded Wetsuit 5/4 Black
Rip Curl Men Elasto CZ Hooded Wetsuit 5/4 Black
Verfügbarkeit für Abholungen konnte nicht geladen werden
The Story
The Elasto line is Rip Curl's stretch-first take on the winter suit. Instead of trading flexibility for warmth, the Elasto CZ Hooded 5/4 combines thick 5/4mm neoprene with a highly elastic construction and a fully attached hood — a suit built around the idea that a cold-water session should not feel like a wrestling match in the car park.
Details
- Material: 80% Rubber (Neoprene), 20% Polyamide, with plant-based foam from natural rubber as the main material
- Thickness: 5/4mm — 5mm on the torso for core warmth, 4mm on the arms and legs for flex and paddle range
- Hood: Integrated, attached hood with drawstring adjustment to lock heat in at the head and neck
- Lining: E5 flash lining for fast drying and thermal comfort, plus E4 thermo lining on warmth-critical panels
- Seams: GB (glued and blindstitched) seam construction for reduced flushing and durability, reinforced with E5 tape and critical stress point taping
- Entry: Front chest zip — easy entry, a close fit at the torso and minimal water ingress compared with a back zip
- Extras: Internal key pocket, waterbased lamination on the main material
- Care: Rinse in fresh water after every use, dry in the shade, hang on a wide hanger
Note: thickness breakdown by body zone, exact stretch-panel placement and panel count are not published by the manufacturer for this model — flag for spec sheet if needed.
Fit & Size Guide
Manufacturer size chart (Rip Curl men's wetsuits, general):
| Size | Height (cm) | Waist | Chest (cm) |
|---|---|---|---|
| S | 170–175 | 76 | 95 |
| MS | 170–175 | 81 | 100 |
| M | 175–180 | 81 | 100 |
| MT | 180–185 | 81 | 100 |
| LS | 175–180 | 86 | 105 |
| L | 180–185 | 86 | 105 |
| LT | 185–190 | 86 | 105 |
| XL | 180–185 | 91 | 110 |
Water temperature (general guideline for 5/4mm hooded suits):
| Thickness | Typical Water Temp |
|---|---|
| 4/3mm | 10–15°C |
| 5/4mm | 6–10°C |
| 5/3mm | 8–12°C |
General guideline — actual comfort range depends on lining, seams, and personal cold tolerance.
A wetsuit should fit snug everywhere with no air pockets or gaps at the neck, wrists or knees. Wetsuits, boots, gloves and hoods should be tried on for proper fit — if you're between sizes, the smaller size usually breaks in correctly.
Shipping
Fast, tracked shipping from our warehouse. Free returns within the legal withdrawal period. Wetsuits can be tried on at home over a base layer — please keep tags attached until you're sure on the fit.
FAQ
Which temperature range is this suit for?
With 5/4mm neoprene plus an attached hood and thermal linings, it's aimed at cold winter water — roughly the 6–12°C range depending on your cold tolerance.
I'm between two sizes — which one?
Go with the size matching your height first, then chest and waist. The suit should feel snug with no bagging at the lower back; it loosens slightly in water and breaks in over the first sessions.
Is the chest zip uncomfortable?
No — a chest zip takes a second longer to get into but seals better and flushes less than a back zip, which is why most cold-water suits use it.
Will it feel stiff at first?
New neoprene always feels tight. The high-stretch construction of the Elasto line softens noticeably after a few sessions in the water.
How do I make it last?
Rinse with fresh water after every session, dry in the shade and store on a wide hanger. Never machine wash, iron or leave it rolled up wet.
Aktie
