RipCurl
Rip Curl Reefer 1.5mm Split Toe Booties Black/Charcoal Black / Charcoal
Rip Curl Reefer 1.5mm Split Toe Booties Black/Charcoal Black / Charcoal
Não foi possível carregar a disponibilidade de recolha
The Story
Reef boots exist because of what sits under the waterline. Rip Curl built the Reefer as a warm-water, tropical surf boot: a low bootie with a neoprene and mesh upper and a reef protective sole, made so you can cross coral and rock without wrecking your soles — and without your feet overheating on the paddle out. At 1.5mm it is thin on purpose: protection where you need it, board feel everywhere else.
Details
- Neoprene / material: 80% neoprene, 20% polyamide, with a neoprene foxing and a neoprene/mesh upper — the mesh keeps the boot light and lets it breathe in warm water.
- Thickness: 1.5mm neoprene throughout — minimal insulation by design, so it is a warm water/tropical boot, not a cold winter one.
- Mesh water flow panels: let water drain and flush through the boot instead of pooling around your foot, so it dries out fast between waves.
- Closure: compression strap with barrel lock, plus an ankle and foot strap, for a secure, adjustable fit that stays in place.
- Sole & protection: reef protective, coral proof outsole for rocky and coral-strewn entries, with durable grip on the deck.
- Entry: pull-on design with a pull-on heel strap and heel tab for quick on/off when wet.
- Toe: split toe construction — separating the big toe gives you better board feel and grip instead of a floppy toe pocket.
Not specified by Rip Curl for this model: seam construction details, lining details and panel count. If you need those before ordering, check with the shop.
Fit & Size
This Reefer boot is offered in sizes US 5 to 13. Rip Curl has not published a model-specific size chart for this boot, so the general conversion below is an industry guideline, not model-specific — when in doubt, size down for a tighter seal.
| US Size | EU Size (approx.) |
|---|---|
| 5 | 37 |
| 6 | 38 |
| 7 | 39 |
| 8 | 41 |
| 9 | 42 |
| 10 | 44 |
| 11 | 45 |
| 12 | 46 |
| 13 | 47 |
Water temperature (general guideline — actual comfort range depends on lining, seams, and personal cold tolerance):
| Thickness | Typical Water Temp |
|---|---|
| 1.5–2mm | 20°C+ |
| 3mm | 15–20°C |
As with any neoprene boot, aim for a snug fit with no air pockets or gaps at the heel, ankle or around the split toe — a loose bootie flushes and slips.
Shipping
Standard shipping rates and delivery times are shown at checkout. Wetsuit accessories ship separately from boards and other bulky items.
FAQ
-
How should the Reefer boot fit?
Snug everywhere, with no air pockets or gaps at the heel, ankle or around the split toe. If you are between sizes, use the conversion table above and lean towards the smaller size — neoprene gives a little, mesh drains the rest. -
What water temperature is it for?
Rip Curl positions the Reefer as a warm water/tropical boot. At 1.5mm it is not built for cold water — pair thicker boots with colder sessions. -
Why split toe instead of a round toe?
The separated big toe stops your foot from sliding around inside the boot and gives you direct board feel and grip on the deck — the trade-off is that the boot takes a session or two to feel natural between the toes. -
Do they stretch or break in?
Neoprene softens and moulds slightly over the first few sessions, so the boot should feel firm but not painful when new. A boot that feels roomy out of the box will only feel looser in the water. -
How do I care for them?
Rinse them in fresh water after every session and let them dry in the shade, away from direct heat. Keep them out of the washing machine and dryer — neoprene and outsoles do not tolerate either.
Compartilhar
